Air inlet assembly – Vortech 8-Rib Drive Upgrade for 2005-2009 Mustang GT User Manual

Page 14

P/N: 007084

15DEC08v1.1(007084v1.1)05MusMaxgrip

A. Re-attach the 3/8" hose to the 1/4"NPT x 3/8"

hose x 90° fitting installed in the inlet duct.

B. Attach the 1" bypass outlet hose(s) to the

plastic fitting(s) and secure the hose with a

#16 hose clamps. Reconnect the bypass vac-

uum line.

C. Re-install the duct to the inlet of the super-

charger and secure in place with the clamps

previously removed

D. Install the 180° duct and the MAF sensor with

filter to the inlet duct leading to the

Supercharger.(See Figs. 4-a, 4-b.) Clock the

MAF exactly as shown in the figure.

Secure the rear clamp at the inlet duct union

to the previously installed support bracket.

(See Fig. 4-b.).

Reconnect the MAF/MAFia plug connection.

4. AIR INLET ASSEMBLy

Fig. 4-b

Fig. 4-a

AIR INLET

SUPPORT BRACKET