Vortech 2013 Scion FR-S and Subaru BRZ - Manual (Page 34)

P/N: 4TF020-010 v2.1, 05/14/2013
©2013 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
27
A. Locate the OEM windshield washer reservoir
assembly removed in a previous step.
B. Separate the filler neck, filler neck grommet,
washer pump and washer pump grommet
from the main tank. The tank will not be
re-used.
C. Cut the excess length from the filler neck.
Remove any plastic burrs from the cut edge.
Discard the portion no longer connected to
the cap end of the tube. See Fig. 6A, 5B.
D. Install the supplied length of Ø1.25” hose
onto the end of the filler neck and secure
with supplied #20 clamp. See. Fig. 6C.
6. WINDSHIELD WASHER
RESERVOIR INSTALLATION
Fig. 6A
Fig. 6C
Fig. 6B