Vortech 2013 Scion FR-S and Subaru BRZ User Manual

Page 16

P/N: 4TF020-010 v2.1, 05/14/2013

Scion FR-S models only:

J. This procedure is to make room for the charge cooler ducts

to pass through. The connectors should be secured with
nylon tie-wraps after the modification has been made and
the ducts are in place.

K. Behind each headlight assembly, the main electrical connec-

tor lays in a cradle extending from the assembly.

L. Pull the connector from the assembly and place aside (do

not disconnect the connector).

M. With a one-inch drum grinder [in a drill or Dremel], remove

80-90% of the cradle. See Fig. 2B.

Fig. 2B