Vortech 2013 Scion FR-S and Subaru BRZ User Manual

Page 22

Text mode
Original mode

P/N: 4TF020-010 v2.1, 05/14/2013

Fig. 3N

Fig. 3O

Fig. 3P

REMOVE TWO

OEM CAM COVER

SCREWS

J. Torque all mounting fasteners. Finish

installing the accessory drive belt by fully
retracting the tensioner and correctly
routing per the belt routing diagram. Note:
final installation of the belt is made easiest
by routing over the top of the alternator
pulley LAST. See Fig. 3N.

K. Remove the two OEM screws near the cam

covers as shown. See Fig. 3O.

L. Loosely attach the supplied steel mounting

plate stiffener behind the supercharger
mounting plate with the supplied M6x
25mm screws. Sandwich the supplied .16”
thick aluminum spacers (1 per hole) between
the other side of the stiffener bracket and
the threaded holes near the cam covers
with the M6 x 20mm long fasteners and
washers provided. Tighten hardware. See
Fig. 3P.