Vortech 2013 Scion FR-S and Subaru BRZ User Manual

Page 23

P/N: 4TF020-010 v2.1, 05/14/2013

M. Mount the supplied airbox support bracket

to the tab located on the driver side frame
rail using the supplied M6 x 12 screw. See
Fig. 3Q

N. Locate the supplied hood prop rod

relocation bracket assembly. See Figs. 3R
and 3S for final position. Temporarily locate
the bracket onto the fender mount flange
with the OEM prop rod inserted in the clip.
Using the bracket as a drill template, align
the assembly into the desired position for
best fit and mark where the mounting holes
are to be drilled into the fender mount
flange. Carefully drill two (2)

⁄

” holes

through the flange. Remove sharp edges
from around the hole edges and mount the
hood prop rod relocation bracket assembly
as shown using the supplied M6 x 12 screws.

O. Locate the plastic OEM belt covers

previously removed from the A/C
compressor and alternator.

Fig. 3Q

Fig. 3R

Fig. 3S