Vortech 2013 Scion FR-S and Subaru BRZ - Manual (Page 29)

P/N: 4TF020-010 v2.1, 05/14/2013
©2013 Vortech Engineering, Inc
All Rights Reserved, Intl. Copr. Secured
22
I. Temporarily remove the lower OEM 6mm
bolt from the center support then loosen
(do not remove) the two bolts at the top of
the support just below the radiator. See Fig.
4J.
J. Attach the supplied charge cooler upper
mounting brackets to the sides of the CAC
using the
1 ⁄
4
"-20 x 1 ⁄
2
" screws with washers.
Note left and right positions. Do not tighten
the screws at this time. See Figs. 4K, 4L.
Fig. 4J
Fig. 4L Fig. 4K