Main bracket assembly, cont’d – Vortech Ford SVT Contour/Mercury 2.5L V6 Cougar User Manual

Page 21

P/N: 4FS020-010

11JAN02 V2.0

(Cougar (4FS V2.0))

Fig. 11-e

11. MAIN BRACKET ASSEMBLY, cont’d.

Fig. 11-f

CH IDLER

1.926” SPACER AGAINST ENGINE COVER (REMOVE

FACTORY BOLT) INSTALL M8 x 100 BOLT AND WASHER

REMOVE FACTORY NUT AND INSTALL 1.735 LONG THREADED

HEX SPACER AGAINST POWER STEERING BRACKET

(INSTALLED BEFORE IDLER PLATE IS ATTACHED)

1.490 LONG THREADED HEX SPACER BETWEEN IDLER

MOUNTING PLATE AND BEARING PLATE

0.481 SPACER AGAINST ENGINE COVER (REMOVE FACTORY BOLT)

INSTALL M8 x 55

BOLT w/WASHER

FIRST INSTALL
M8 x 75 STUDS
INTO BLOCK
(REMOVE
FACTORY BOLTS)

M8 x 25 BOLTS AND WASHERS

THRU TO HEX SPACERS

Ø7/16 NUT AND WASHER (INSTALLED

BEFORE PLATE IS ATTACHED TO ENGINE)

IDLER PULLEY AND .509 THICK IDLER

SPACER BEHIND MOUNTING PLATE

ALT.

CRANK

POWER

STEERING

IDLER

AIR

COND.

TENSIONER

S/C

7/16 x 2 BOLT

DUST SHIELD

IDLER PLATE

.509 IDLER SPACER

M8 x 25 BOLT AND

WASHER (3 PLACES)

7/16 NUT AND

WASHER

M8 x 100 BOLT AND

WASHER

SUPPLIED IDLER
PULLEY

LOWER SPACER
(1.926")

THREADED HEX SPACER
(3 PLACES)

ENGINE

TIMING

COVER

IDLER PLATE ASSEMBLY (SIDE VIEW)