Vortech Ford SVT Contour/Mercury 2.5L V6 Cougar - Manual (Page 12)

P/N: 4FS020-010
©2002 Vortech Engineering, Inc.
All Rights Reserved, Intl. Copr. Secured
11JAN02 V2.0
(Cougar (4FS V2.0))
4. OIL FEED
A. Remove the 1/4” NPT socket head plug located
below the EGR valve on the rear-most
cylinderhead. (See
Fig. 4-a.)
B. Install the supplied 1/4” NPT to #4 straight fitting,
using engine oil on the pipe threads. (See Fig.
4-b.)
C. Connect one end of oil feed line to the #4 fitting.
D. Temporarily cover the open end of the oil feed
line to protect it from debris until connecting it to
the supercharger in a later step.
4
Fig. 4-a
OIL FEED HOSE CONNECTED
NOTE: Teflon tape, or other sealant is not rec-
ommended at it might loosen and
cause blockage of the .032” oil feed
orfice, resulting in supercharger failure.
FACTORY OIL PLUG
Fig. 4-b
PCV VALVE