Denon AVR-3802 - Manual (Page 22)

22
ENGLISH
• The set is equipped with a function for searching for the registration number if you do not know the preset
code (a 4-digit number) when setting the preset memory.
Auto search function
2 Press the power ON/SOURCE button and the
OFF button simultaneously.
• “SET UP” appears on the remote control
unit’s display.
OFF ON / SOURCE
3 Press the ENTER button. ENTER
SHIFT
4 Use the D and H cursor buttons to display
“AUTOSEARCH” on the remote control unit,
then press the ENTER button.
1 2 3
4 5 6
7 8 9
+10 0 TV/ VCR
OFF
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME CHANNEL
+
-
+
-
VDP DVD
POWER
REMOTE CONTROL UNIT RC-884
ON / SOURCE
TUNER
VDP
VCR-1
RDS PTY RT
VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO CD
SURROUND
INPUT
OUTPUT TEST TONE SPEAKER
6.1 / 7.1 SURROUND
5CH / 7CH
ANALOG EXT.IN MODE
CALL 2 BACKLIGHT CALL 1
STEREO
STEREO DOLBY/DTS
SURROUND DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN SETUP
MENU
SHIFT
SURR. PARA. OSD
A/B
MUTING
BAND MODE
TUNING
TUNING
2
6
4, 5
3, 4, 5, 7
BAND MODE
TUNING
TUNING
ENTER
SHIFT
1 For TV, DBS or CABLE components, turn on the
component’s power. For CD, MD, TAPE, DVD,
VCR and VDP component’s, turn on the
component’s power and load a disc or tape.
5 Use the D and H cursor buttons to display the
mode of the component to be searched for on
the remote control unit’s display, then press the
ENTER button.
• The registration codes are transmitted in
order.
BAND MODE
TUNING
TUNING
ENTER
SHIFT
6 When the component operates,
press the POWER OFF button.
• The mode and the registered
number appear on the remote
control unit’s display.
The channel switches on the TV, DBS or CABLE
device and playback stops on a CD, MD, tape,
DVD, VCR or VDP player.
OFF
7 Press the ENTER button.
•
“COMPLETE” is displayed on the
remote control unit’s display and the
selected code is preset.
ENTER
SHIFT
If you press the power OFF button late at step 6,
press the
D and H cursor button once to move to
the next code or back to the previous code one
step at a time.
D button: Next code
H button: Previous code
Auto search resumes when you move ahead from
the code at which you stopped.
9 OPERATION
B
3
OFF
TV CD CDR/MD/ TAPE RECEIVER
VCR DBS/CABLE VDP DVD
POWER
REMOTE CONTROL UNIT RC-884
ON / SOURCE
DISPLAY MENU
2
3
Before operating
1 Refer to “CONNECTIONS” (pages 4 to 8) and
check that all connections are correct.
2 Select “AMP” using the RECEIVER button.
(only when operating with the remote control
unit)
ON / STANDBY
OFF £
¢
ON / SOURCE ON/STANDBY
Lights
(Main unit) (Remote control unit)
• ¢ ON/STANDBY
The power turns on and “ON/STANDBY”
indicator is light.
Several seconds are required from the time
the power operation switch is set to the “¢
ON/STANDBY” position until sound is output.
This is due to the built-in muting circuit that
prevents noise when the power switch is
turned on and off.
Set the power operation switch to this
position to turn the power on and off from the
included remote control unit (RC-884).
• £ OFF
The power turns off and “ON/STANDBY”
indicator is off.
In this position, the power cannot be turned
on and off from the remote control unit (RC-
884).
3 Turn on the power.
Press the POWER operation switch (button).
RECEIVER
(Remote control unit)