Vdp dvd – Denon AVR-3802 User Manual
Page 20
20
ENGLISH
5
Use the
D and H cursor buttons to select the
mode for the button at which the system call
signals are to be registered, then press the
ENTER button.
BAND
MODE
TUNING
TUNING
ENTER
SHIFT
6
“SELECT KEY” is displayed. Press
the button at which the system call
signals are to be registered, then
press the ENTER button.
• “ENTER KEYS” is displayed, then
the mode display appears.
ENTER
SHIFT
7
q Press the mode selector button according to
the button with the remote control signals to
be registered.
TV
CD
CDR/MD/ TAPE RECEIVER
VCR
DBS/CABLE
VDP
DVD
w Press the buttons with the remote control
signals to be registered one at a time.
8
Press the ENTER button.
• “COMPLETE” appears on the
remote control unit’s display and
registration is completed.
ENTER
SHIFT
NOTES:
• The remote control signals of the buttons pressed while registering the system call signals are emitted, so
be careful not to operate the components accidentally (cover the remote sensors, for example).
• If you exceed the number of signals that can be registered, “FULL” appears on the remote control unit’s
display and only the number of signals that can be registered are registered (up to 29 operations).
1
Press the button at which the system call signals have been stored.
• The stored signals are transmitted successively.
(3) Using the system call function
Resetting
1
Press the power ON/SOURCE button and the
OFF button at the same time.
• “SET UP” appears on the remote control
unit’s display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the
D and H cursor buttons to display
“RESET” on the remote control unit, then press
the ENTER button.
BAND
MODE
TUNING
TUNING
ENTER
SHIFT
(1) Resetting the system call buttons
1
2
3
4
5
6
7
8
9
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR
DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP
DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS
PTY
RT
VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.IN
MODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND
MODE
TUNING
TUNING
1
3, 4, 5
2, 3, 4, 5, 6
4
Use the
D and H cursor buttons to display
“RESET SYS” on the remote control unit, then
press the ENTER button.
• “SYS SEL” appears on the remote control
unit’s display.
BAND
MODE
TUNING
TUNING
ENTER
SHIFT
5
Press the
D and H cursor buttons
to select the system call setting
to be reset.
q To reset CALL 1 or CALL 2, select “SYS
CALL 1” or SYS CALL 2”, then press the
ENTER button.
w To reset system call settings registered at
other buttons, select “SYS MODE”, press
the ENTER button, press the mode button at
which the button is registered, then press
the ENTER button again.
6
“CONFIRM” is displayed. To reset the setting,
press the ENTER button while “CONFIRM” is
displayed.
• “SYS SEL” appears on the remote control
unit’s display.
ENTER
SHIFT
The remote control unit’s display switches
as shown below each time the
D and H
cursor buttons are pressed.
RESET PRE
RESET LRN
RESET ALL
RESET SYS
BAND
MODE
TUNING
TUNING
The remote control unit’s display switches
as shown below each time the
D and H
cursor buttons are pressed.
SYS MODE
SYS CALL 1
SYS CALL 2
ENTER
SHIFT
ENTER
SHIFT
1
Press the power ON/SOURCE button and the
OFF button at the same time.
• “SET UP” appears on the remote control
unit’s display.
OFF
ON /
SOURCE
2
Press the ENTER button.
ENTER
SHIFT
3
Use the
D and H cursor buttons to display
“RESET” on the remote control unit, then press
the ENTER button.
BAND
MODE
TUNING
TUNING
ENTER
SHIFT
(2) Resetting the preset memory
1
2
3
4
5
6
7
8
9
+10
0
TV/
VCR
OFF
TV
CD
CDR/MD/ TAPE RECEIVER
VCR
DBS/CABLE
SKIP
SKIP
ENTER
MEMORY
VOLUME
CHANNEL
+
-
+
-
VDP
DVD
POWER
REMOTE CONTROL UNIT
RC-884
ON /
SOURCE
TUNER
VDP
VCR-1
RDS
PTY
RT
VCR-2 /V.AUX
DVD
TV/DBS
CDR/ TAPE
PHONO
CD
SURROUND
INPUT
OUTPUT
TEST
TONE
SPEAKER
6.1 / 7.1
SURROUND
5CH / 7CH
ANALOG
EXT.IN
MODE
CALL 2
BACKLIGHT
CALL 1
STEREO
STEREO
DOLBY/DTS
SURROUND
DSP
SIMU.
DISPLAY
SYSTEM CALL
DIRECT
RETURN
SETUP
MENU
SHIFT
SURR.
PARA.
OSD
A/B
MUTING
BAND
MODE
TUNING
TUNING
1
3, 4, 5
2, 3, 4, 6, 7