SurgeX RP-IP-GNS - Manual (Page 6)

© 2014 Electronic Systems Protection, Inc. / Technical Support: 1-800-645-9721 / espei.com Page 5
User Manual
2. Network Settings: View and change IP Configuration.
a. Select Obtain IP address automatically to automatically receive an IP address
(1) BOOTP: Select Enable to permit the Bootstrap Protocol (BOOTP) server to
assign the IP address from a pool of addresses automatically. Enable is the
default.
(2) DHCP: Select Enable to permit the Dynamic Host Configuration Protocol (DHCP)
to assign a leased IP address to the RP-IP automatically. Enable is the default.
(3) AutoIP: Select Enable to permit the RP-IP to generate an IP in the 169.254.x.x
address range with a Class B subnet. Enable is the default.
(4) DHCP Host Name: Enter the desired host name for the RP-IP.