SurgeX RP-IP-GNS - Manual (Page 13)

© 2014 Electronic Systems Protection, Inc. / Technical Support: 1-800-645-9721 / espei.com Page 12
User Manual
6. Server configuration: Allows for the configuration of the following parameters:
a. IP Address
b. Gateway IP Address
c. Netmask
d. SNMP Manager IP Address
e. Telnet configuration password
f. DHCP device name
g. DHCP FQDN option
7. Channel 1 configuration: Allows for the configuration of the following parameters:
a. Connect Mode (Do not modify. Default is C0.)
b. Source Port
c. Destination Port (Currently Unused)
d. Destination IP (Currently Unused)
e. Enable Pack Control (Do not modify. Default is No.)
f. Disconnect Time
8. Debug: Not intended for general use. Enables EV/XG data communication debug.
9. Security: Allows for the configuration of the following parameters:
a. Disable SNMP
b. SNMP Community Name
c. Disable Telnet Setup
d. Disable TFTP Firmware Update
e. Disable Port 77FEh (configuration port)
f. Disable Web Server
g. Disable Web Setup
h. Disable ECHO ports
i. Enable Enhanced Password
j. Use Encryption (Currently Unused)
10. Factory defaults: Reset the unit to factory defaults. Will not modify IP settings.
11. Exit without save: Exits and terminates telnet session without modifying parameters.
12. Save and exit: Stores parameters and reboots with new parameters in place.