SurgeX EV-23010 - Manual (Page 9)

Software User Manual
iii. Up
▲ and Down ▼ Arrow buttons adjust the vertical axis scaling of each
channel.
iv. Left
◄ and Right ► Arrow buttons adjust the horizontal (time) axis
scaling.
v. While in normal operation, pressing the Wait button will freeze the
currently displayed waveform.
vi. One Shot Trigger Function
• The scope may be set to acquire and hold a waveform display,
triggered by either Voltage or Current level.
• Press the One Shot button above the desired channel. A trigger
level cursor will appear on the display.
• Next, Drag the trigger level cursor to the desired amplitude and
press the Wait button
• If the Voltage of Current exceeds the trigger level, the scope will
hold the display
© 2014 Electronic Systems Protection, Inc. / Technical Support: 1-800-645-9721 / espei.com
8