SurgeX EV-23010 - Manual (Page 6)

Software User Manual
c. Click Detect.
i. The auto detect process will automatically detect the COM Port number
assigned to the Data Interface Cable
.
ii. If the auto detection process is successful, click Save. The software is
now properly configured and ready for use.
iii. If the auto detection process is not successful, verify that the Data
Interface Cable device drivers are properly installed, and that the physical
connections between the enVision and the PC have been made correctly.
4. Software Modes
The enVision Software is organized into several operational modes. The modes are
activated by clicking the corresponding button at the bottom of the software interface.
Press the Help Button (“?”) in the upper right for additional information on the features
available in the current mode. Hovering the mouse cursor over items will also display
additional information.
Scope Mode, Chart Mode, and Historical Data Mode include a Save
function. Press the Save button to save data to a CSV file. Time Stamped
data may also be saved as a report in PDF format.
© 2014 Electronic Systems Protection, Inc. / Technical Support: 1-800-645-9721 / espei.com
5