SurgeX EV-23010 - Manual (Page 10)

Software User Manual
c. Chart Mode
i. The Chart Mode enables a chart style data logging function of 8 electrical
parameters. Data point measurements are acquired once per second.
The measured parameters may be enabled or disabled by pressing the
corresponding button.
ii. Chart display of 8 electrical parameters:
• Line Voltage: AC RMS Volts Line-Neutral (Line1-Line2)
• Load Current Draw: AC RMS Amps
• Load Power Draw: Watts
• Neutral-Ground Voltage: AC RMS Volts Neutral-Ground (Line2-
Ground)
• Line Frequency: Hertz
• Load Power Factor
• Line Voltage Crest Factor
• Energy Usage (kWh) of connected equipment since date and
time of last manual usage reset
© 2014 Electronic Systems Protection, Inc. / Technical Support: 1-800-645-9721 / espei.com
9