StorCase Technology 9-Bay 4U SCSI Ultra160 - Manual (Page 38)

InfoStation User Interface 29
InfoStation User's Guide - Rev. A01 StorCase Technology, Inc.
Banner Set-Up
The following steps show how to customize the InfoStation start-up banner.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Setup.
3. Press ENTER until display = Alarm.
4. Press DOWN until display = Banner.
5. Press ENTER to change the Banner.
The first letter/character will start to flash.
6. Press UP or DOWN to change the first letter/
character.
7. Press ENTER to accept the new or existing
letter/character.
8. Repeat Steps 6-7 to change banner characters
2-8. Pressing ENTER at the last letter/character
will accept the new banner altogether.