StorCase Technology 9-Bay 4U SCSI Ultra160 - Manual (Page 21)

12 InfoStation User Interface
StorCase Technology, Inc. InfoStation User's Guide - Rev. A01
Power Supply Status
The following steps show how to access InfoStation power supply module status information.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press ENTER again until display = Temp.
3. Press DOWN until display = PS.
4. Press ENTER until display = PS1:OK (or
PS1:ERR).
This is the current status reading for Power
Supply 1.
5. Press DOWN to scroll through and view the
status of each power supply.
NOTE: PSx:ERR indicates an error with the respective power supply!
Press ENTER after each individual power supply status reading to view a detailed
message regarding power supply condition. A detailed message will scroll across
the display regardless of power supply condition.
InfoStation Environmental Information and Set-Up