StorCase Technology 9-Bay 4U SCSI Ultra160 - Manual (Page 14)

Introduction 5
InfoStation User's Guide - Rev. A01 StorCase Technology, Inc.
Front Panel
(Figure 4)
• User Interface Module (UIM) - Provides control of drive set-up options while the
8-character LED panel displays system statuses, alarms, and warnings. Refer to
section "INFOSTATION USER INTERFACE" for further information.
• SCA Drive Carrier(s) - Accommodate up to nine (9) 3.5" single-connect SCSI
devices. Backplane design with direct-connect SCA connectors eliminates cable
connections to SCSI drives, increases data integrity, and supports drive hot
swappability.
• LED(s) - Provides the following information:
Drive Ready - Indicates that the drive is properly installed and ready for access.
Drive Activity - Indicates that the drive is being accessed.
Drive Fault - Indicates a drive failure.
• Bay Identify LED(s) - Indicate that the drive bay is currently being selected for SCSI
ID set-up (via the InfoStation's User Interface Module).
• Insert/Remove Push Button(s) - Allow the drive carrier(s) to be removed and
installed at anytime.
• Chassis Handle(s) - Provide a sturdy grip for the installation and removal of the rack
mount chassis.
Figure 4: InfoStation Front Panel
Bay Identify
LED
Insert/Remove
Push Button
LEDs
Drive
Ready
Drive
Fault
Drive
Activity
User Interface
Module
IFS_4
SCA Drive
Carrier
Drive Carrier
Release Button
Drive Carrier
Handle
Chassis
Handle