StorCase Technology 9-Bay 4U SCSI Ultra160 - Manual (Page 33)

24 InfoStation User Interface
StorCase Technology, Inc. InfoStation User's Guide - Rev. A01
Temperature Alarm Level Set-Up
The following steps show how to view and change the InfoStation temperature alarm warning
and critical levels.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Setup.
3. Press ENTER until display = Alarm.
4. Press ENTER again until display = Warn:xxC.
This is the current warning temperature level (in
degrees Celsius) at which the InfoStation alarm
will sound.
5. Press ENTER again until display = Warn=xxC.
6. Press UP or DOWN to change the warning level.
7. Press ENTER to accept the change.
Warning Level