StorCase Technology 9-Bay 4U SCSI Ultra160 - Manual (Page 23)

14 InfoStation User Interface
StorCase Technology, Inc. InfoStation User's Guide - Rev. A01
Repeater Module Status
The following steps show how to access InfoStation repeater module status information.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press ENTER again until display = Temp.
3. Press DOWN until display = Repeater.
4. Press ENTER until display = REP1:OK (or
REP1:ERR).
This is the current status reading for Repeater 1.
5. Press DOWN to scroll through and view the
status of each repeater.
NOTE: REPx:ERR indicates an error with the respective repeater!
Press ENTER after each individual repeater status reading to view a detailed
message regarding repeater condition. A detailed message will scroll across the
display regardless of repeater condition.