StorCase Technology 9-Bay 4U SCSI Ultra160 - Manual (Page 29)

20 InfoStation User Interface
StorCase Technology, Inc. InfoStation User's Guide - Rev. A01
Spin-Up Option Set-Up
The following steps show how to change the InfoStation drive bay spin-up option.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
NOTE: If the enclosure is already powered up, then the spin-up option will be applied to
the drive immediately after it has been inserted.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Bay Cfg.
3. Press ENTER until display = SCSI ID.
4. Press DOWN until display = Spin up.
5. Press ENTER to change the spin-up option.
This is the current spin-up setting.
6. Press UP or DOWN to change the spin-up option.
7. Press ENTER to accept the change.