beautypg.com

SOR Bourdon Tube Weatherproof Pressure Switch User Manual

Page 3

background image

Form 1214 (03.13) ©SOR Inc.

3/4

Calibration

Remove the cover and locate the 1/4” hex head adjusting screw. To increase the set point,
extend the spring by turning the adjusting screw clockwise. To decrease the set point, turn
the adjusting screw counterclockwise. An independent pressure source and gage should be
used for precise setting.

Do not adjust any other screws or brackets. Movement of these parts could
render the device inoperative.

This manual is related to the following products: