Rocktron Utopia B300 - Manual (Page 76)

76
Step 3
3 4 1 2
Step 1
Step 2
Step 4 Press the STORE button at this time to initiate the All Restore procedure and erase
presets 1-128, replacing them with the original factory presets. The display will flash
"RESTORED" as the UTOPIA B300 memory is restored.
!! CAUTION !!
This procedure will permanently erase all presets (1-128) and replace them with the original
factory presets. If you have altered and stored presets which you do not want to erase, do not
perform the following procedure.
8. Restoring all factory presets
Turn the PARAMETER SELECT knob 2 steps clockwise to "ALL RESTORE 0".
A specific code number must be entered to restore the UTOPIA B300 memory Use the
PARAMETER ADJUST knob to enter the number "22".
Turn the FUNCTION SELECT knob clockwise to "FACTORY RESTORE".
! ! WARNING ! !
Pressing the STORE button at this time will permanently erase all user presets and replace
them with the original factory presets. If you have altered and stored presets which you do not
want to erase, turn the FUNCTION SELECT control to exit this function.
The display will return to Preset 1
f a c t o r y r e s t o r e
A L L R E S T O R E 0
f a c t o r y r e s t o r e
r e s t o r e d
f a c t o r y r e s t o r e
f a c t o r y r e s t o r e
A L L R E S T O R E 2 2