Rocktron Utopia B300 - Manual (Page 32)

32
6. WAH-WAH Function
The WAH-WAH function is available only in configurations which display "WAH" in the configura-
tion title.
The UTOPIA B300 has an internal wah-wah which allows for the built-in expression pedal to be
used as a wah-wah pedal when selected in the Pedal Controllers function. To do this, you will need to
activate this in the "PEDAL CONTROLLERS" function and assign the wah frequency sweep parameters
(See "PEDAL CONTROLLERS" for more information)
The PARAMETER SELECT knob will allow you to access these WAH-WAH parameters:
The WAH-WAH parameter determines whether the wah-wah is active for the
current preset. You can select IN to make the Wah active or OUT to turn it off.
The WAH FREQUENCY parameter allows you to manually sweep the frequency
range of the wah-wah via the PARAMETER ADJUST control. Selecting a fre-
quency for this parameter and storing the WAH-WAH parameter IN allows you
to use the wah-wah as a fixed wah. You may also assign the wah to the built-in
expression. See section called "PEDAL CONTROLLERS" for more details.
WAH-WAH
WAH FREQ