Rocktron Utopia B300 - Manual (Page 31)

31
6. EFFECTS LOOP Function
The EFX LOOP control allows you to insert return audio from the device con-
nected to the Effects Loop into the audio path before any processing. This means
you may connect your favorite Distortion pedal or effect and use them within any
preset and control their on/off status at anytime while using any preset. It should
be noted that the device inserted should be in its own active state [turned on].
EFX LOOP
The EFFECTS LOOP function allows you to determine if the Effects Loop is ON or OFF for each
Preset.
The PARAMETER ADJUST knob will allow you to adjust this parameter: