Tape is still on roll – Pitney Bowes DM875 Series User Manual
Page 163
DM825™ and DM875™ Series Digital Mailing System Operating Guide
SV62200 Rev. C
9 - 3
Tape is still on
roll
1. When you see the red stripe on the tape, go to the Tape Maintenance
screen:
a. Press the Menu key.
b. Select Maintenance.
c. Select Load Tape.
d. Select Unload Tape.
2. If your DM Series™ Digital Mailing System does not have the optional
WOW® module, open the feed cover and remove the tape roll.
If your DM Series™ Digital Mailing System has the optional
Weigh-On-The-Way® (WOW®) module, open the WOW® cover.
Refer to the appropriate figure below.
Location of the tape roll
under the feed cover on a
DM825™ and DM825™
system without the optional
WOW™ module.
DM825™ and DM825™Series Digital Mailing System
Location of the tape roll
under the WOW™
cover on a DM825™ or
DM875™system with
the optional WOW™
module.
DM825™ and DM875™ Series Digital Mailing System
with the optional WOW™ module