Parr Instrument 6772 - Manual (Page 55)

6772
Calorimetric Thermometer Instruction Manual
7-1
REPORTS
The 6772 Calorimetric Thermometer can transmit its stored test data in either of two ways.
The Auto Report Destination key on the Reporting Controls Menu toggles the report
destination between the display and an optional printer connected to the USB port of the
Calorimetric Thermometer. This menu also selects the type of reports that are generated
automatically by the Calorimetric Thermometer.
There are two kinds of Calorimetric Thermometer reports: Preliminary and Final.
• Preliminary Reports are generated at the conclusion of a test. They are intended to
confirm to the operator that the results of the test fell within the expected range.
• Final reports are generated once all of the thermochemical corrections have been
entered into the file. If fixed corrections are used for all of the thermochemical
corrections, a preliminary report will not be generated. The report will automatically
become finalized.
Thermochemical corrections are entered by using the following steps to select and edit
preliminary reports. Test results are stored as files using the sample ID number as the file
name. A listing of the stored results is accessed by pressing the REPORT command key. The
REPORT command key brings up a sub-menu on which the operator specifies.
Select From List This key displays the stored results specified with the following two
keys.
Run Data Type This key enables the operator to display only determination runs,
only standardization runs, only solution runs or all runs.
Run Data Status This key enables the operator to display only preliminary reports,
only final reports, only preweighed samples reports, all stored reports or preliminary
and final reports.
Prompt For Final Values When turned on, the controller will prompt the operator to
enter any missing corrections for fuse, sulfur and acid in any selected preliminary
reports. When turned off preliminary reports will be displayed as entered.
The displayed files can be sorted by sample ID number, by type, by status or by date of test
by simply touching the appropriate column. Individual files can be chosen by highlighting
them using the up and down arrow keys to move the cursor. Press the SELECT key to
actually enter the selection. Once selected the highlight will turn from dark blue to light blue.
A series of tests can be selected by scrolling through the list and selecting individual files.
The double up and down keys will jump the cursor to the top or bottom of the current display.
If a range of tests is to be selected, select the first test in the series, scroll the selection bar to
the last test in the series and press EXTEND SEL to select the series.
The DESEL ALL key is used to cancel the current selection of files.
To bring the selected report or series of reports to the display, press the DISPLAY
key. To send the reports to the printer press the PRINT key.