Parr Instrument 6772 - Manual (Page 41)

6772
Calorimetric Thermometer Instruction Manual
5-15
Auto Preweigh Controls:
Accesses sub-menu, used to automatically
assign Sample ID numbers when a series of
samples are preweighed ahead of the time
they are actually tested.
Automatic Preweigh ID:
ON/OFF toggle for this feature.
Automatic Preweigh ID Prefix:
An entry here will be used as a prefix
for all pre-weigh sample IDs.
Next Automatic Preweigh ID Number:
Shows the next Sample ID which will be assigned and is used to enter the beginning
Sample ID of any series
Automatic Preweigh ID Increment:
Establishes the increment between samples.
Reporting Controls Menu
Report Width:
Toggle this key to set the column width of
the printer to either 40 or 80 columns. Select
40 when the 1758 Printer is used.
Automatic Reporting:
Toggles the automatic reporting ON/OFF.
When ON, preliminary reports will be
generated at the conclusion of the test and
final reports will be generated as soon as all
of the thermochemical corrections are
available. When OFF, reports will only be
generated through the following reporting
controls.
Automatic Report Destination:
Toggles to direct the reports to the Printer port or the screen display.
Individual Printed Reports:
When set to ON, will generate header information for each report printed. In the OFF position,
only one header will be printed for a series of tests.
Edit Final Reports:
When set to ON, enables the user to revise sample weight and thermochemical corrections
of finalized reports from the report menu.