Parr Instrument 6772 - Manual (Page 40)

6772
Calorimetric Thermometer Instruction Manual
5-14
Automatic Sample ID:
When set to ON the unit will automatically assign sample identification numbers in
accordance with parameters set by the other three keys on this menu. When set to OFF, the
user manually enters each sample ID when prompted to do so.
Auto Sample ID Prefix:
An entry here will be used as a prefix for all
sample IDs, if the Automatic Sample ID is
set to ON. Press this key to access a sub-
menu for entering an alphanumeric prefix.
Next Auto Sample ID Number:
Establishes the initial sample number for a
series of tests and then shows the next
sample ID which will be assigned. Used
when the Automatic Sample ID is set to
ON. Press this key to access a sub-menu
for entering a numeric increment.
Auto Sample ID Increment:
Establishes the increment between sample numbers; used when the Automatic Sample ID is
set to ON. Press this key to access a sub-menu for entering a numeric increment.
Sample Weight Warning Above:
This key displays and leads to a sub-menu used to set the maximum allowable sample
weight (including spike) in grams. A warning will be given if sample weights above this value
are entered.
Spike Weight Entry Mode:
This key steps through the options for entering spike weights either manually through the
touch screen, network or through the balance port.
Sulfur Entry Mode:
This key toggles steps through the options for entering sulfur correction value either manually
through the touch screen or automatically through the balance port