Palram SUNLIT - Manual (Page 4)

2
Colors*
Structure
Standard Colors Multi-Layered
LT = Light Transmission
ST = Solar Transmission
Clear Bronze
White
Opal
White
Diffuser
Green** Blue** Bronze/Opal
Solar Guard
(Solar Control/Opal)
Solar
Ice
Solar
Control**
CL SLT
Smart
Green
Twin wall 4mm 82% 35% 30% 35% 30% 30%
Twin wall 4.5mm 82% 35% 30% 35% 30% 30%
Twin wall 6mm 80% 35% 20% 35% 30% 30%
Twin wall 8mm 80% 35% 35% 35% 30% 25% 45%/ 34% 60%/ 55%
Twin wall 10mm 79% 35% 30% 35% 30% 25% 60%/ 55%
Triple wall 8mm 76% 35% 48% 35% 30% 25%
Triple wall 10mm 76% 35% 48% 35% 30% 25%
Triple wall 16mm 76% 35% 48% 35% 30%
X-Lite 16mm 60% 25% 38% 35% 30%/ 25%
V-Structure 20mm 63% 25% 20% 10%
V-Structure 25mm 62% 30%
V-Structure 32mm 61% 20% 20%
V-Structure 35mm 60%
V-Structure 40mm 58%
X-Lite 25mm 60% 25% 15% 10% 5% 20% 20%/ 16% 42%/ 35%
X-Lite 32mm 58% 20% 15% 10% 5% 20% 20%/ 16% 42%/ 35%
X-Lite 35mm 57% 20% 15% 10% 5% 20% 20%/ 16% 42%/ 35%
X-Lite 40mm 57% 20% 15%
7 Walls 10mm 64% 45% 29%
7 Walls 16mm 64% 45% 29%
7 Walls 20mm 62% 45% 29%
7 Walls 25mm 60% 40% 22%
*Light transmission values adhere to ASTM D-1003. **Blue, Green and Solar Control are made to order only.
Typical Physical Properties
Property Method* Conditions Units Value
Density D-792 g/cm³ 1.2
Heat deflection temperature (HDT) D-648 Load: 1.82 MP °C 135
Service Temperature - Short term °C -50 to +120
Service Temperature - Long term °C -50 to +100
Coefficient of linear thermal expansion D-696 mm/mm °C 6.5x10-5
Tensile strength at yield D-638 10 mm/min MPa 62
Elongation at break D-638 10 mm/min % >90
Impact falling dart ISO 6603/1 J 40-400
Practical thermal expansion/contraction mm/m 3
* ASTM except where noted otherwise.
Flammability
Method Classification* Method Classification*
BS 476/7 Class 1 ASTM D-635 CC-1 (SUNLITE® FR)
EN 13501 B, s1, d0 ASTM E-84 Class A
* Depends on sheet type. For more information please contact your Palram distributor.