OPTI-UPS MD120L - Manual (Page 91)

34 Chapter 4 Operator Control and Display Panel
34
Chapter 4 Operator Control and
Display Panel
This chapter introduces the functions and operation instructions of the parts on UPS operator control
and display panel in detail, and provides LCD display information, including LCD display types, detailed
menu information, prompt window information and UPS alarm list.
4.1 Introduction
The operator control and display panel is located on the front panel of the UPS. Through this LCD
panel, the operator can operate and control the UPS, and check all measured parameters, UPS and
battery status and event and alarm logs. The operator control panel is divided into three functional areas
as shown in fig 4-1: mimic current path, LCD display & Menu keys, and Control and Operation Keys. The
detailed description of parts on operator control and display panel is shown in table 4-1.
Fig 4-1 UPS operator control and display panel
Table 4-1 Description of UPS operator control and display panel
Part No. Function Button Function
REC Rectifier indicator EPO EPO switch
BAT Battery indicator TAB switch
BYP Bypass indicator ENTER confirm
INV Inverter indicator ESC exit
OUTPUT Load indicator
STATUS Status indicator