Delta Electronics 10GBASE-SR SFP+ Optical Transceiver LCP-10G3A4EDR - Manual (Page 4)

LCP-10G3A4EDR
DELTA ELECTRONICS, INC.
4 Revision: 0B
2008/9/5
www.deltaww.com
Optical Receiver Characteristics (T
c
= -5 to 70 )
Parameter Symbol Min. Typ. Max. Unit Note
Signaling speed (nominal) T
S
10.3125 Gb/s
Signaling speed variation from
nominal.
±100 ppm
Center Wavelength λ 840 860 nm
Overload P
O
-1 dBm
Receiver sensitivity in OMA RSO -11.1 dBm 1
LOS De-assert LOS
D
-11 dBm
LOS Assert LOS
A
-27 dBm 2
LOS Hysteresis LOS
D
-LOS
A
0.5 dB
Receiver Reflectance -12 dB 3
Differential Output Amplitude 150 850 mV
Stressed Receive sensitivity OMA -7.5 dBm
Notes:
1. Measured by reference TX with 4.75dB extinction ratio at 10
-12 BER
2. When LOS asserted, the data output is Low-Level (fixed)
3. When the terminal is viewed from the optical path, the reflection toward the optical path of the optical
signal with a central wavelength of 840nm to 860nm transmitted to terminal.
4. Distance, shown in the “Link Length” table, are calculated for worst case fiber and transceiver
characteristics based on the optical and electrical specifications shown in this document using
techniques utilized in IEEE 802.3. In the nominal case, longer distance are achievable.