MOCET M22 - Manual (Page 67)

M22 USER MANUAL
4. Use the keypad to enter the Dial Timeout
and press OK key to validate the input. The
You should enter a number from 0 to 9.
Press the Back key to exit the menu. The
default dial timeout setting is 6.
Ping
1. Press the Menu key on LCD.
 Admin Setting
2. Use the navigation key to select the Admin
Setting item. Press OK key to validate the
selection.
Type the administrator’s
password to get into Admin menu.
 Network Setting
3. Use the navigation key to select the
Network Setting item. Press OK key to
validate the selection.
 Ping
4. Select the Ping item and press OK key.
5. Use the keypad to input network address
and press OK key, then LCD will show the
ping result several seconds later.
67