MOCET M22 - Manual (Page 11)

M22 USER MANUAL
2
Speaker
For ring and hands-free talking.
3
Hook switch &
Handset
bottom cradle
Under the cradle, a hook switch is used for handset
hang-on and hang-off detection.
The handset bottom cradle is for the placement of
handset; placing the handset on the bottom cradle
while on a call will end the call.
4
Message LED
The message LED. Steady blue means the phone is
booting or upgrading.
5
LCD Display
The LCD screen is used for displaying phone’s
settings, phone number, call status and so forth.
6
Soft keys
Soft keys displayed on the LCD are used for item
selection or control. The various soft key functions
depend on the current activity on the phone as they
are context-sensitive.
7
Line keys
Line keys can be used for indicating busy lamp field
(BLF) status of other phones, speed dial phone
numbers, or for activating features of a service or
IP-PBX. A blue LED is associated with each key to
indicate its status.
8
Programmable keys
Programmable keys can be used for indicating busy
lamp field (BLF) status of other phones, speed dial
phone numbers, or for activating features of a service
or IP-PBX. A green LED and a red LED are
associated with each key to indicate its status.
9
Numeric keypad
[1], [2], …, [9], [*], [0], [#]: The numeric keypad for
dialing numbers.
10
Volume Control Keys
The Volume Control key is used to set the loudness
of the ringer, handset, headset and
speakerphone functions. While the phone is in idle
state, the ringer is adjustable, and it will play ring
tone with current volume level. While in a call, the
handset, headset or speaker volume is adjustable.
[Note]: The left and right arrow keys can be used for
volume adjustment purpose when idle.
11
Headset key
This headset key is used to activate or deactivate the
external headset. The headset icon will show to
indicate active status.
11