MOCET M22 - Manual (Page 63)

M22 USER MANUAL
Admin Setting
You will need to enter administrator’s password to set the administrator’s account, network,
QoS, dial timeout, language and reset to default.
The default network settings are the following:
Default IP address:
192.168.1.10
Default Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Default DNS: 8.8.8.8
Default Administrator’s Username of Web:
admin
Default Administrator’s Password of Web: 1234
There are 5 functions for setting:
 Account Setting
 Networking Setting
 Voice Setting
 Dial Timeout
 Reset to Default
If you need to change these default settings, please refer to the following instructions.
Operation Description
Admin/User
Name, Password
1. Press the Menu key on LCD.
 Admin Setting
2. Use the navigation key to select the Admin
Setting item. Press OK key to validate the
selection.
Type the administrator’s
password to get into Admin menu.
 Account Setting
3. Use the navigation key to select the
Account setting item. Press OK key to
validate the selection. The LCD displays
the Account Setting menu.
 Admin/User
4. Select the Admin/User item and press OK
key.
63