MOCET M22 - Manual (Page 29)

M22 USER MANUAL
Basic Call Features
Operation Description
Making a Call
1. Pick-up the handset. You will hear dial
tone played.
2. Use the keypad to dial the phone
number. Press OK key or “Dial” soft-key
to dial out immediately, or wait for a while
(Dial Timeout setting) for auto-ending the
dial.
 The LCD window displays the number you
enter.
Note: You could use the “BkSp” soft-key to
delete the last digit.
Start talking to called party.
On-hook the handset when your
conversation is over.
There are two mode to establish a call for this IP phone, handset mode
and hands-free mode. In this manual, only handset mode is used for
example. In the following features, you can replace to hands-free
mode by pressing key. When the conversation is over, press
key again to release call. For headset mode, please prepare a
headset first.
Ending a call
or
or End
 If there is only one call, just place the
handset back into the cradle, press
speakerphone or press “End” soft-key to
end the call.
 If there is another call, press the “End”
soft-key to end the call.
Holding a call
or Hold
Press the “Hold” soft-key or Hold key on the
phone to place an active call on hold.
Resuming a call
or Rsume
Press the “Rsume” soft-key or Hold key on the
phone again to place an active call on hold.
29