MOCET IP3062 - Manual (Page 9)

Page 9
MOCET IP3062 Professional IP Phone User Guide
1.1. Phone Features and Specifications
 Complete VoIP and networking protocol support
 Rich supplementary call services and phone features
 HD acoustic hardware design for handset and speakerphone
 G.722 wideband audio codec support
 4 SIP Lines with 16 call appearances
 Built-in two port 10/100 Ethernet switch
 5-way on-phone conferencing
 16 programmable keys with LEDs
 Interoperable with Asterisk, Freeswitch, Metaswitch and Broadsoft
 Auto-provisioning, remote management and security enhancements
 802.11n Wi-Fi connection through an external Wi-Fi adapter
 External extended dial module to extend programmable keys
1.2. Requirements
The IP3062 IP Phone requires the following environments:
 Compatible SIP-based IP PBX system or Internet-based hosted SIP service account
 Ethernet/Fast Ethernet LAN (10/100 Base-T)
1.3. Installation and Setup
The IP3062 can support three different tilt angles of 60°, 51°, and 30° (see below).
1.3.1. Attaching the Stand to the Phone
After unpacking the box, attach the stand to the IP3062 phone first. Below this paragraph
we illustrate an example below of 60° angle installation with the stand. There are three
sets of “antlers” on the top of the stand (named 1, 2 and 3) and there are three sets of
mounting slots on the back of the phone (named A, B and C). See the illustration below.