MOCET IP Commander - Manual (Page 4)

Page 4
IP Commander for iOS VoIP User Manual
1. Introduction
IP3092 Series Communicator includes a VoIP engine in it. By running IP Commander
App on your iPad, you can configure the IP3092 Communicator as an IP Phone. This
user manual is for you if you want to use IP3092’s VoIP function. If you are only using
the general audio/video Apps, no need the VoIP function, then you can skip this user
manual. For general audio/video App user, please just refer to the IP3092
Communicator Quick User Guide which comes in the product package.
IP Commander, an iPad App, can be installed to enable, configure and operate the
embedded VoIP engine of the IP3092 Communicator. Overall, the seamless
combination of IP Commander with IP3092 Communicator makes a top-high end,
powerful but easy-to-use desktop VoIP Phone when they are connected to ISP/ITSP’s
SIP server or office’s IP PBXs.
Before enabling the VoIP phone feature for the IP3092 Communicator, please read this
user manual carefully to understand the basic installation and operation of IP
Commander.
2. Getting Started
At first time when you unpack the IP3092 Communicator package, please follow the
following steps to power on the machine, install IP Commander and start up the VoIP
function in your IP3092 Communicator.
2.1 Tuning on Communicator and Connecting iPad
When you power on the IP3092 Communicator, please follow the following steps to
connect your iPad properly:
Step 1: Following the hardware install section of IP3092 Communicator Quick User
Guide, connect all Ethernet cables and power adaptor properly;
Step 2: Then power on the IP3092 Communicator, but do not plug your iPad at this
instance;
Step 3: Wait for the completion of Communicator power-on process. The power-on
process will take about two minutes. The blue message waiting indicator (MWI)
LED on the top of the IP3092 Communicator will be steady “On” during the
booting period. When the LED goes off, the power-on process completed and
the IP3092 Communicator is ready for use.