Delta Electronics LA2-1-1025-33 - Manual (Page 6)

Ordering Information
4886 LA2-1-1025-33
Page Number 6
Ordering Information:
Order Code Description DRFT Reference
LA2-1-1025-33 2W Broadband Laboratory amplifier module 4886
Options
-A12 Heat Sink Option 0202
-A13 Heat Sink Option with DC Fan, pre wired 0203
-A14 Ruggedized for vibration 0204
-T2 Extended Burn In 0271
-T3 Extended Data Collection 0272
Standard Pallet Options:
SMA Female Connectors, Input and Output. Stainless Body, Gold Center pin, 4-hole SMA bolted to pallet amplifier edge through bottom two holes located at amplifiers RF IN and RF OUT
locations. All stainless steel hardware.
Enclosure- all aluminum machined enclosure available for most pallet amplifiers. Alodyned aluminum, alloy 6061-T6. SMA Female input and output RF connectors. Supply voltage and ground
through solder / feedthrough connections. Module must be bolted to appropriate heatsink.
Heat Sink - aluminum extruded heat sink, black anodized. Pallet amplifier or module will be bolted to heatsink. Customer will be required to provide adequate airflow.
Heat sink with fan - aluminum extruded heat sink as above, with included fan bolted to push air through the heat sink. Depending on heat requirements, a second fan may also be provided on
the output of the unit.
Ruggedized - all screws have threadlocking compound applied, and all flying components are staked and attached to base. Designed to withstand MIL-STD-810E 514.4 Category 8.
Testing Options:
Standard - includes power test and brief burn - in under laboratory conditions. Printed test report gives graph of Gain and Input Return Loss at rated P1dB and Voltage Conditions. Report
shows pass/fail critera. All amplifiers include this test.
Extended burn in - 8-hour burn in at P1dB with standard test run at completion. Unit is monitored during test and any discrepancy reported. Standard test data is included.
Extended data collection - Standard data is run and included. Detailed data is taken point by point giving the customer 25 - 70 frequency points, depending on the amplifier model. For each
frequency point, data is generated to include gain, input power, input return loss, current, second harmonic, third harmonic, efficiency, audio distortion.
Other tests available - Vibration, Temp cycling, Shock. Please inquire.
The specifications contained herein are subject to change without notice. Delta RF Technology, Inc. assumes no liability for the use of this information.
This data sheet and contents are the property of Delta RF Technology, Inc. © Delta RF Technology, Inc. 2008.