Martin Christ RVC 2-18 CDplus - Manual (Page 28)

RVC 2-18 CD&
5 Set-up and connection
28
Version 04/2012, Rev. 1.3 of 25/11/2013 • sb
Translation of the original operating manual
5.6 Connection of an electromagnetic stop valve
The electromagnetic stop valve must be installed at the back of the
rotational vacuum concentrator between the chamber and the vacuum
pump or the cooling trap (depending on the type of application, chapter 5.5
- "Connection of a vacuum pump and/or a cooling trap".
NOTE
Observe the installation direction of the stop valve!
NOTE
Only for GEMÜ solenoid valves,
type 52 (DN6):
GEMÜ solenoid valves of this type
must be installed contrary to the
marked flow direction (see the
illustration)!
Fig. 8: Gemü solenoid valve, type 52 (DN6)
Pos: 100 /01 0 Univ ersal mod ule/ Ab schnitt swechs el @ 0 \mo d_1 202 124 514 062_ 0.d ocx @ 418 @ @ 1
Pos: 101 /01 0 Univ ersal mod ule/ Sei tenwe chsel @ 0\ mod _12 021 1624 431 2_0 .docx @ 1 05 @ @ 1