Marsh Sound Design The HT 4000 High Resolution Audio-Video Processor - Manual (Page 9)

QUICK
SET
UP
Input assignment
1. Press 3 input assignment you will
change the defaults if they are not what you
require press the input you would like to
change and it will blink.
2. How to change the CD from DIG 2 input to
ANALOG input. Press 8 the CD will blink press
select button till you see the input changes to
analog press exit and the new input is set.
3. Press exit to get back to the main menu
Bass trim
Calibration
This allows setting the bass level for each input
1. Press 5 To Select Bass trim menu, to raise
the bass 3 db on VCR 1.
2. Press 1 the VCR 1 level will blink, press the
volume up button 3 time, ever time you press
the volume button the level will raise 1 db and
the reveres if you press the volume button do
3. Press exit. to get back to the main menu
1. To calibrate the system you want all the
speakers to be at the same volume, to do this
2. Press 2 and center will output pink noise
then press 1 and pink noise will come from left
front speaker adjust the volume of the front
speaker so it is at the same volume ask the
center speaker. You can go back and forth till
they sound the same volume to you. Repeat this
for all speaker till they all sound at the same
volume as the center
3. Press 8 and pink noise will come from
subwoofer adjust the volume with the volume
button till it
sounds the same as the rest of the
speaker. It will be a much lower sound than the
rest of the speakers
4. Press exit to get back to the main menu
Marsh Sound Design
9
INPUT VIDEO
1. VCR1 ANALOG
2. VCR2 ANALOG
3. TV ANALOG
4. LD DIG 5
5. AUX ANALOG
6. SAT DIG 3
7. DVD DIG 1
8. CD DIG 2
9. TAPE ANALOG
EXIT
INPUT AUDIO BASS TRIM
1. VCR1 0db
2. VCR2 0db
3. TV
4. LD
5. AUX
6. SAT
7. DVD
8. CD
9. TAPE
EXIT
0db
0db
0db
0db
0db
0db
0db