Marsh Sound Design The HT 4000 High Resolution Audio-Video Processor - Manual (Page 16)

16
Marsh Sound Design
CONTROLS
&
FUNCTIONS
8. SEEK DOWN BUTTON
9. ZONE 2 BUTTON
10. MUTE BUTTON
11. AM/FM BUTTON
When this button is pressed and the tuner
Source is selected the tuner will advance to
the next lower valid channel
This button toggles the CD, TAPE, TUNER,
AUX source buttons, AM/FM buttons,
VOLUME buttons, MUTE buttons, SEEK
buttons, OFF buttons, to control zone 2. If
action for 5 sec. Buttons revert back to
main zone. Zone 2 can be one with main
zone off
This button toggles mutes on and off in
main zone and the same when the controls
are in zone 2 mode.
When this button is pressed the tuner will
toggle between AM/FM
1. POWER SWITCH
2. OFF BUTTON
3. VOLUME UP BUTTON
4. VOLUME DOWN BUTTON
5. SOURCE BUTTONS
6. SOURCE BUTTON 7.1
7. SEEK UP BUTTON
Switches the unit into STANDBY mode. The
LED turns on. Do not turn this switch off to
turn the system off press the off button.
This button turn the system from on to
standby
When pressed it raises the volume by 1 db
and when held down it raises the volume
fast.
Same ash up but it lowers the volume
When the button is pressed the source is
selected and the unit is turned on from
standby. This is the same for all sources.
When this button is pressed the 7.1 multi
Channel audio is selected and the DVD
Video.
When this button is pressed and the tuner
Source is selected the tuner will advance to
the next valid station.
Front Panel Controls
Figure 1. HT 4000 Front Panel Controls.