Marsh Sound Design The HT 4000 High Resolution Audio-Video Processor - Manual (Page 13)

Marsh Sound Design
13
Set up an audio video source with a digital
output and change the default name
DVD, DISH, SATELITE, GAME, CABLE BOX
We will use the AUX input and a cable box for this
instruction
1. Connect an s-video from the cable box s-
video out to the s-video input of the aux input.
2. Connect a good quality RCA cable from the
digital output of the cable box to the Dig4 input
on the unit
3. With the cable box of and the monitor or TV
on press the AUX input button on the remote, this
will turn the unit on. Press the menu button on
the remote and the main menu will show on the
monitor
4. Press 3 on the remote and the input select
menu will show up. Press 5 and the default input
will blink (analog) press select till dig4 is blinking.
You have now selected digital 4 as the audio input
fro the AUX input.
5. Now to change the name of the input to
cable. Press guide on the remote the name
change menu will show.
6. Press the right curser till C is blinking, press
select and you will see the C replacing the first x in
the New Name row. Press the left curser till the A
is blinking press select, Press the right curser till
the L is blinking press select. Press the left curser
till the E is blinking press select. Now all the new
name show CABLE
7. Press 1 on the remote to select change
name.
8. Now in the input select menu number 5-
show cable not Aux.
You have now selected Dig4 as the digital input
for the new named input CABLE The remote will
still say Aux. So you will press the aux button on
the remote to select the CABLE input
QUICK
SET
UP
S-Video
Digi4
Input