Marsh Sound Design The HT 4000 High Resolution Audio-Video Processor - Manual (Page 12)

QUICK
SET
UP
12
Set up your VCR
We will use VCR1 input.
1. Connect a s- video cable from your VCR
to the s-video input of VCR1 if your VCR does
not have a s-video output use the composite
video and a RCA video cable
2. Connect 2 RCA audio cables from your
VCR audio output to the audio inputs of the
VCR1 of the unit.
This completes the installation of the VCR to
the system
Set up Zone 2 with CD changer
1. Connect the audio output of the
changer with RCA cable to the AUX input of
Zone 2.
Marsh Sound Design
S-Video
Audio Left
Audio Right
Composite
Video
Left Audio
Input
Right Audio
Input