beautypg.com

Marsh sound design, Quick set up 8 quick set up – Marsh Sound Design The HT 4000 High Resolution Audio-Video Processor User Manual

Page 8

background image

QUICK

SET

UP

8

Quick Set Up

Press menu on remote main menu will show
on monitor

Speaker size

Speaker distance

1. Press 1 quick set up speaker size
2. Press 1 front will blink press

select to toggle through large and small

3. Press 2 center will blink press

select to toggle through small and none

4. Press 3 surround will blink press

select to toggle though small, none and
large only if front are large.

5. Press 4 back will blink press

select to toggle through 2 small, 1
small, none and 1 large, 2 large if front
are large

6. Press 5 subwoofer will blink press

select yes, no

7. Press exit and exit the changes

will be stored into memory.

1. Press 2 quick set up speaker

distance

2. Press 1 left the distance will blink,

press the select button till you have the
distance from the left speaker to the
listening position (Keep pressing select
it will advance 1 foot at a time till you
reach 30 ft then it will go back to 1ft.)

3. Repeat for the Center, Right,

Right surround, back right, (if only 1
back) back left, left surround.

4. Press exit to get back to the main

menu

Marsh Sound Design

1. QUICK SET UP -SPEAKER SIZE
2. QUICK SET UP -SPEAKER DIST
3. INPUT ASSIGNMENT
4. TUNER/PAL/NTSC SETTING
5. BASS TRIM
6. CALIBRATION
7. COMPRESSION

OFF

8. STATUS DISPLAY

OFF

9. DVD AUDIO FULLRANGE

NO

0. RESET TO DEFAULTS

NO

EXIT

1. FRONT

SMALL

2. CENTER

SMALL

3. SURROUND

SMALL

4. BACK

2 SMALL

5. SUBWOOFER

YES

EXIT

From your listening position

1. FRONT LEFT

12 feet

2. CENTER

12 feet

3. FRONT RIGHT

12 feet

4. SURROUND RIGHT

8 feet

5. BACK RIGHT

8 feet

6. BACK LEFT

8 feet

7. SURROUND LEFT

8 feet

EXIT