LINK Systems Microlink - Manual (Page 10)

MicroLink: Operator Interface Terminal
Manual Revision 1.0 4/20/99 3-2
Figure 3.2: Dimensional Drawing of Remote Mount Enclosure (Hinge on Lower Edge)
The second mounting option is to install the
MicroLink system in a separate enclosure that can
be purchased from Link Systems. This typically
allows the system to be mounted closer to the
press bed, which helps the user to see the screen
more readily and to more easily use the
information from the unit. The physical
dimensions of this enclosure are shown in Figure
3.2. The MicroLink system mounts in the door of
the enclosure, which is hinged on the lower edge.
When the unit is mounted on the machine,
rubberized shock mounts must be used.