Lingenfelter L460285297 & L460316109 Lingenfelter LNC-TRM Torque Reduction Module v1.2 User Manual
Page 2

Page 1
L460285297 (LNC-TRM) Parts List*
#
Part number
Description
1
LNC-TRM
LPE Torque Reduction Module
1
72” trigger wire harness
7
06483
Hook and loop tape, per inch
4
AV16037
Self tapping screws
1
L950050000
LPE technician’s screwdriver
2
L920180000
LPE bumper sticker & sponsor decal
1
Instructions
L460316109 (LNC-TRM-LS9A) Parts List*
#
Part number
Description
1
LNC-TRM-LS9A
LPE Torque Reduction Module for LS9 & LSA applications
1
72” trigger wire harness
7
06483
Hook and loop tape, per inch
4
AV16037
Self tapping screws
1
L950050000
LPE technician’s screwdriver
2
L920180000
LPE bumper sticker & sponsor decal
1
Instructions
Optional Items
Description
Part Number
Transient voltage suppression (TVS) diode kit
L450080000
LED for indicator light
• Red 12 vdc LED with 30 cm leads
L450030000
• Green 12 vdc LED with 30 cm leads
L450040000
Sealed 40 amp heavy duty relay kit
L450100000
Red LED lighted paddle toggle switch, 20 amp
DC-7600500
Additional items to connect to Davis Technologies modules:
#
Part number
Description
1
12015793
3 pin Weather Pack connector
3
15324982
Wire seal, 2.03-2.85mm wire
3
12089188
Female terminal, 18-20 AWG
1
12010300
Cavity plug
* The LNC-TRM is not designed for use with the LSA and LS9 engine combined coil pack/fuel injector
harness connectors. A version of the LNC-TRM is available for those applications, LNC-TRM-LS9A.
This module is a custom order part available on request and is not normally kept in inventory.