Stoppering tray dryer components, Setting up your stoppering tray dryer – Labconco FreeZone Stoppering Tray Dryers 79480 Series User Manual
Page 13
Chapter 3: Getting Started
Product Service 1-800-522-7658
9
IF YOUR STOPPERING TRAY DRYER WAS DAMAGED IN
TRANSIT, YOU MUST FILE A CLAIM DIRECTLY WITH THE
FREIGHT CARRIER. LABCONCO CORPORATION AND ITS
DEALERS ARE NOT RESPONSIBLE FOR SHIPPING DAMAGE.
DO NOT DISCARD THE CARTON OR PACKING MATERIAL
FOR YOUR STOPPERING TRAY DRYER UNTIL YOU HAVE
CHECKED ALL OF THE COMPONENTS AND INSTALLED
AND TESTED THE STOPPERING TRAY DRYER.
Stoppering Tray Dryer Components
Locate the model of Stoppering Tray Dryer you received in the following table.
Verify that the components listed are present and undamaged.
Power Cords
Catalog #
Description
Volts Hz
13
36
40
0
13
36
50
0
13
42
10
0
13
32
60
1
13
32
70
1
7948020
Stoppering Tray Dryer
115
60
X
7948030
Stoppering Tray Dryer
230
50
X
7948040
Stoppering Tray Dryer
230
60
X
7948060
Stoppering Tray Dryer
230
50
X
7948070
Stoppering Tray Dryer
230
50
X
Plus the following:
Part #
Qty.
Component Description
7353900
1
User’s Manual
1880712
4
Screw ¼-20 x .75
1905621
4
Nut ¼-20
1911416
8
Washer ¼
7353403
1
Cable RS 232
If you did not receive one or more of the components listed for your Stoppering
Tray Dryer, or if any of the components are damaged, contact Labconco
Corporation immediately for further instructions.
Setting Up Your Stoppering Tray Dryer
After you verify receipt of the proper components, move your Stoppering Tray
Dryer to the location where you want to install it. Then, follow the steps listed
below.