Konig Electronic USB turntable - Manual (Page 11)

11
Recording Operation
To download music and save to your computer:
1. Place the record on the turntable.
2. Move the tonearm over to the record to start playing.
3. Click the Record ( ) button to start recording.
The waves (left and right tracks) will show on the interface.
4. At the end of a song, click “Stop” ( ) in Audacity, then lift and move the tonearm to the tonearm rest.
Move the cursor to the wave area and left click at the end of the song.
For the next song, replace the record or move tonearm to another desired song. Immediately press the
“Record” ( ) button in Audacity and recording will continue and another set of R/L tracks will appear on
the interface.
5. Repeat steps 3 and 4 until you have finished recording.