Heath Consultants Hi Flow Sampler - Manual (Page 45)

Hi Flow

Sampler Maintenance
Instruction 0055-9017 45
Figure 4-1. Charging the Battery Pack
4.3 Removing the Cover
When instructed to do internal maintenance, remove its protective cover as follows:
1. Do the following before removing the instrument from the backpack:
- Disconnect battery pack
- Unscrew metal-cage diffuser from the instrument’s gas exhaust port
- Disconnect ground clamp wire
2. Remove instrument from backpack.
3. Remove screws from cover as shown in Figure 4-2; then pull cover away from unit.
Figure 4-2. Removing the Cover